Klaris Support

Behavior&#xA0;<ul><li>At the end of an ice-making cycle, the tops of the cubes may appear slightly slanted or wavy.</li></ul>Common Causes&#xA0;<ul><li>Ice harvest &gt;2 hours into the hold cycle</li><li>Poor/uneven thermal contact between the tray/inserts and freeze chamber</li><li>To hot or humid environment</li></ul>Things to Try&#xA0;<ul><li>For the best results, we recommend retrieving your ice within 1&#x2013;2 hours after the cycle completes. To better align with your schedule, consider using the delayed start function to time the finish more precisely.</li><li>Ensure tray and insert fully seated, use blunt object to ensure fully seated in bottom of freeze chamber</li><li>Dry the outside of the tray and the inside of the freeze chamber before each use&#xA0; </li><li>Move machine to a cooler environment</li></ul>

Wavy Cubes

Original Craft Ice Maker

Cloudy Ice

Mixer Frozen/Stuck Error

Timeout Error

Blank, Frozen or Flashing Screen

Partial Cubes or No Ice is Made

Long Freeze Times

Tray is Difficult to Remove from the Freeze Chamber

Replacement/Spare Accessory Parts

Leaky Tray

Craft Ice Storage

Run a Self Test

Lid is Difficult to Open

Circular Mark on Top of Cube

Timeout Error copy

Ice is Difficult to Remove from the Tray

Delayed Start Feature

Run a Self Test - Mini

Cleaning

Circular Mark on One Cube

Mixer Stuck Error

Progress Bar & Power Button not Illuminating

No Ice or Partial Ice Cubes Produced

Light Sequencing

Error Code Overview

Mini Craft Ice Maker

draft

Accessories

Wavy CubesUpdated 2 months ago